Tag / pillow closures

How to Sew a Square Pillow with Piping
by Charlotte Kaufman

How to Sew a Square Pillow with Piping

While conceptually the idea of sewing a square pillow case sounds easy, there are several things to consider when you undertake this task.

While conceptually the idea of sewing a square pillow case sounds easy, there are several things to consider when you undertake this task.

Go smaller

The cardinal rule of making your own pillow cases is to make them approximately an inch smaller than the pillow form you want them to cover. If you have a 22” x 22” pillow, you need to make the case 21” x 21”. Of course, don’t forget your seam allowances. If you use ¼” seam allowances, than you would cut a piece of fabric that is 21.5” x 21.5”.

The cardinal rule of making your own pillow cases is to make them approximately an inch smaller than the pillow form you want them to cover.

The cardinal rule of making your own pillow cases is to make them approximately an inch smaller than the pillow form you want them to cover.

Fussy cut

I normally wouldn’t advocate for drawing your lines on the front of your fabric, but this fabric by Hawthorne Threads needs to be cut to the size of the panel you want for your pillow case. When fussy cutting, sometimes drawing on the front of the fabric is necessary to ensure correct sizing. Haven’t heard of the term ‘to fussy cut?” It means to carefully cut out a piece of fabric for a specific purpose.

It means to carefully cut out a piece of fabric for a specific purpose.

It means to carefully cut out a piece of fabric for a specific purpose.

See the center pieces of these quilt blocks by Amy Gibson of The Cookbook Quilt Along? These are prime example of taking the time to fussy cut your fabric.

These are prime example of taking the time to fussy cut your fabric.

These are prime example of taking the time to fussy cut your fabric.

Choose your pillow back

Once you’ve cut your front panel, you’ll need to cut your back. You can finish pillows many ways. Check out my post from last fall on different options for pillows. I chose to do an envelope close, so I made cut two panels the same height as my pillow, but each was 13.5” wide. That allows for a folded, sewn hem on each of the ‘opening’ portions of the back panel.

That allows for a folded, sewn hem on each of the ‘opening’ portions of the back panel.

That allows for a folded, sewn hem on each of the ‘opening’ portions of the back panel.

Consider interfacing

For added pop, I fuse lightweight interfacing to the front panel fabric. It has such a gorgeous design that I want it to stay crisp and firm while it sits on my bed looking fabulous.

Curve your corners

This step is so important!! I have a small piece of cardstock that I’ve cut to help me round the corners of my square. Why would I do this, you ask? Because pillows are 2-3. They are big and fluffy and when you attempt to sew straight sides of a square you often end up with starfish points instead of nice, square corners.

I have a small piece of cardstock that I’ve cut to help me round the corners of my square.

I have a small piece of cardstock that I’ve cut to help me round the corners of my square.

This is an example of a pillow cover that didn’t have rounded corners before it was sewn. Trust me on this, it makes all the difference!

This is an example of a pillow cover that didn’t have rounded corners before it was sewn.

This is an example of a pillow cover that didn’t have rounded corners before it was sewn.

To pipe or not to pipe?

That is indeed the question. I love the contrast that piping gives pillows. If your machine has a piping foot, now is the time to install it.

If you are new to this step, consider pinning the piping in place. This is not my first rodeo, so I just sew and go.

Consider pinning the piping in place.

Consider pinning the piping in place.

Make sure your piping follows those slightly rounded corners. Don’t forget to snip the piping edge just up to the seam so that if folds nicely around each corner.

Don’t forget to snip the piping edge just up to the seam so that if folds nicely around each corner.

Don’t forget to snip the piping edge just up to the seam so that if folds nicely around each corner.

Now place your two backing pieces on top of the front panel, right sides together. Pin, and sew.

Now place your two backing pieces on top of the front panel, right sides together.

Now place your two backing pieces on top of the front panel, right sides together.

Not so fast

Once you’re done, YOU ARE NOT ACTUALLY DONE. No. Unpin everything and flip the cover right sides out. Carefully inspect all along the seams and make sure no thread is showing from the piping like you see here. If you find anything that needs to be tightened up, flip the pillowcase inside out again and resew the hem, making sure to sew just to the edge of the piping for a nice clean finish.

Carefully inspect all along the seams and make sure no thread is showing from the piping like you see here.

Carefully inspect all along the seams and make sure no thread is showing from the piping like you see here.

Flip the pillow right sides out and again carefully inspect it. If all looks good, turn it inside out AGAIN and then then trim the edges, especially around the corners so that the corners will fully turn out when you flip the pillow cover to the front again.

If all looks good, turn it inside out AGAIN and then then trim the edges.

If all looks good, turn it inside out AGAIN and then then trim the edges.

Finishing touches

Once you’ve turned your pillow case right sides out, run your fingers along the inside of the seams and fully push out the piping and corners, then iron to get out any wrinkles from the sewing process. Slip it onto your pillow form and voilà, you’ll have a wonderfully plush and SQUARE pillow case.

See the difference rounding those corners made?

See the difference rounding those corners made?

See the difference rounding those corners made?

Do you have any secrets for making the perfect pillowcase? If so, share them in comments!

———————————————————————————–
Charlotte Kaufman is a writer and sewist in Mammoth Lakes, California. She specializes in marine and home interiors and continues to fall more and more in love with quilting. You can follow her at charlottekaufman.com.
Types of Pillow Closures
by Charlotte Kaufman

Types of Pillow Closures

There are several methods of finishing the back, or ends of a pillow, depending on what kind of cover you are making.

There are several methods of finishing the back, or ends of a pillow, depending on what kind of cover you are making.

Sewing your own pillow covers is a quick way to bring a personal touch to your home. There are several methods of finishing the back, or ends of a pillow, depending on what kind of cover you are making. Knowing the best way to close a pillow can mean the difference between a project that looks just okay to a project that looks professionally magnificent.

Envelope closure.

Envelope closure.

1. Envelope Closure

An envelope close looks just like it sounds. Your pillow backing will have two panels of fabric that overlap, leaving an envelope style closure in which you slip your pillow form.

You can also embellish envelope closes with ties and buttons to add interest and whimsy.

You can also embellish envelope closes with ties and buttons to add interest and whimsy.

This style is excellent if you aren’t ready to take on zippers, if you know you will frequently be washing the cover, or you want to use a method that is quick and still looks beautiful. You can also embellish envelope closes with ties and buttons to add interest and whimsy.

Zipper closure.

Zipper closure.

2. Zipper Closure

With a zipper close you can either finish your cover with an invisible zipper or use an exposed zipper. I like to use zippers for pillows that are not standard sizes, like this custom Ghostbuster pillow I made for a friend’s son.

 

Zippers are especially well suited for large pillows like these floor cushions.

Zippers are especially well suited for large pillows like these floor cushions.

Zippers are especially well suited for large pillows like these floor cushions.

3. Drawstring Closure

 

Drawstring closures are common on tube pillows. There is nothing tricky about a drawstring close on a pillowcase. If you have made a pair of pajama pants or a tote bag with a drawstring close, you can create a pillowcase that closes the same.

4. Pillowcases for bedding – to add a hidden flap or not?

 

A pillowcase for bedding classically closes one of two ways. The first is with an open end. If you go this route, make sure to allow for enough room at the end to fully cover the inner pillow form.

A second option is to add a hidden flap on the open end.

A second option is to add a hidden flap on the open end.

A second option is to add a hidden flap on the open end. This flap allows you to tuck the pillow form inside and keep it from showing.

This flap allows you to tuck the pillow form inside and keep it from showing.

This flap allows you to tuck the pillow form inside and keep it from showing.

Do you have a favorite method for pillow case closures? I think my favorite may be drawstring but envelope comes a close second. Tell us yours!

Charlotte Kaufman is a writer and sewist in Mammoth Lakes, California. She specializes in marine and home interiors and continues to fall more and more in love with quilting. You can follow her at charlottekaufman.com.