Accuquilt GO! Qube 4” Companion Set-Angles

GO! Qube 4" Companion Set-Angles

Pair this companion set with the GO! Qube 4” Mix & Match Block (55229) and the GO! Qube 4” Companion Set – Corners and you can create over 216 block designs, just add an AccuQuilt GO! Fabric Cutter and fabric! NOTE: You must own a GO! Qube Mix & Match 4" Set before adding the same-sized Companion Set.

Included:

• (4) GO! 6" x 6" Dies (with quilt shape number)::
  • GO! Triangles in Square-Center-2" Finished Square (55241) (Shape 13)
  • GO! Triangles in Square-Sides-2" Finished Square (55242) (Shape 14)
  • GO! Kite-Center-2” Finished Square (55243) (Shape 15)
  • GO! Trapezoid 45°-15/16"H x 3 3/16"W Cut (2" Finished Square) (55244) (Shape 16)
• GO! Cutting Mat-6" x 6" (55137)
• Storage box
• Pattern Booklet with 10 patterns
• Step-by-step videos online

Why Quilters Love the GO! Qube 4"Companion Set-Angles:

• GO! Qube 4" Companion Set-Angles expands the number of quilt blocks the GO! Qube Mix & Match 4" Block (55229) can make from 72 to 216 or more when combined with GO! Qube 4" Companion Set-Corners (55230).
• Continuation of die numbering system from the GO! Qube Mix & Match Blocks.
• Cutting angles by hand is difficult and time-consuming. GO! Qube Companion Set-Angles makes it easy and accurate. You will never rotary cut these shapes again.
• Dog-eared corners make piecing the Kite and Triangle in Square blocks easier and with less bulk at the points. We’ve figured the math out for you!
• Now you can make popular quilt designs, like Storm at Sea or Kaleidoscope, that you may not have attempted before because they can be a challenge to cut.
• Innovative storage system to keep your dies organized.
• Everyday value-priced.

AccuQuilt Benefits:

• Cut so much more fabric in less time.
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut.
• Safe to use -- No blades come anywhere near your fingers

Die Tips:

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Use good quality fabric to reduce fabric stretch.
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Downloads

Cutting tips for Go! Dies

Cutting Equivalents Chart

Die Compatibility Chart

Fabric Reference Chart