Sizzix Accessory - Glue Gun

Forget the mess! The Sizzix Glue Gun was designed to bond and adhere materials on a variety of surfaces for plenty of good clean fun. Compatible with high-temperature glue sticks (7mm diameter), this Glue Gun features a non-drip nozzle to help prevent mess when bonding materials that allows for greater accuracy and control when gluing small amounts of adhesive. With an ergonomic handle for enhanced ease of use, the Sizzix Glue Gun is UL Listed for added trust and safety.

Operating Instructions

1. Attach wire stand into holes on front of glue gun.
2. Plug into electrical outlet.
3. Insert 0.44" diameter glue stick into inlet tube.
4. Allow glue gun to heat for 5 minutes.
5. Squeeze trigger to dispense glue. More glue is dispensed by pulling trigger back, releasing and repeating as necessary. Continue glue flow by adding additional glue sticks.
6. Press surfaces to be glued together within 15 seconds.
7. Do not pull glue sticks from glue gun. If changing glue, feed remainder of glue stick through glue gun.
8. Unplug after use and allow to cool before storing.

High-temperature glue guns are best used with wood, plastic, metal, ceramics, magnets, leather, paper, fabric and other materials.

Warning

When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Burn Hazard: May cause burns upon contact with skin when heated or melted.

Safety Information:

1. Work environment should be clean, dry, well lit and clear of flammable materials.
2. Do not use outdoors or near water.
3. Do not expose glue gun to rain, moisture or direct sunlight.
4. Keep away from children and store locked up when not in use.
5. Do not carry glue gun by cord or unplug from outlet by pulling on the electrical cord.
6. Disconnect glue gun when not in use.
7. Glue gun is on when plugged in. Do not leave unattended.
8. Do not use hot melt glue to replace structural fasteners.
9. Do not use any material other than recommended glue sticks.
10. Avoid accidental discharge. Use trigger, only dispense glue from glue sticks. Feeding or pushing glue stick with too much force into heated glue gun may cause hot glue to be unexpectedly expelled from nozzle or to flow back from inlet tube.
11. Allow glue gun to cool before storing.
12. Save these safety instructions for future reference.

Downloads

Specifications

Weight:

0.33 Pounds

Width:

6 1/2"

Height:

4 3/4"

Depth:

1"

Glue Stick Size:

7mm diameter

Power:

8W VOLTAGE

AC:

120v

Frequency:

60Hz